China (Mainland)
polyurethane adhesives sealant for auto glass CAS NO.9009-54-5
- Min.Order: 500 Kilogram
- Payment Terms: L/C,D/A,D/P,T/T,MoneyGram
- Product Details
Keywords
- auto glass sealant
- polyurethane adhesives for auto glass
- car glass sealant
Quick Details
- ProName: polyurethane adhesives sealant for aut...
- CasNo: 9009-54-5
- Molecular Formula: CH3H8N2O
- Appearance: Black paste
- Application: It's used for auto glass replacement a...
- DeliveryTime: Sample order:2-3 days; MOQ order:7-10 ...
- PackAge: 310ml cartridge/400ml sausage/600ml sa...
- Port: Shanghai
- ProductionCapacity: 1000000 Metric Ton/Year
- Purity: 1.30±0.05Gr/cc
- Storage: Keep in cool and ventilative place;Tem...
- Transportation: By air or by sea
- LimitNum: 500 Kilogram
- Operating Temperature: 5~35℃
- Valid Period: 9 months
- Shear Strength: 20-25
- Curing Time: 3-5Mm/24hrs
- touch dry time: 20-60Min
- Volatile content: ≤4%
- Main Raw Materia: Polyurethane
- Extrudability: ≥80ml/min
- Shore A-hardness: 50±5ShoreA
- Tensile strength: ≥6N/mm2
- Elongation at break: ≥300%
Superiority
PU8611 is one component polyurethane adhesive with very good tensile strength and elasticity, primerless.
1. Bond very well with surface of variety substrates such as all kinds of metal, lumber, glass, polyurethane, epoxy, resign,PU and coating material, etc. Also with good cohesive force and durable elastic sealing performance
2. One component sealant with fabulous thixotropy, it’s convenient to apply with rapid curing
3. Excellent water, weather and aging resistance
4. Excellent wear-resisting property, high tear strength
5. Paintable and polishable
6. No sag or flow phenomena within 30mm perpends
7. Primerless
Details
Usage
1. Specially used for windshield and side glass of passenger car, cars and special vehicle
2. Also use for glass steel and plastic accessories (car roof, side body and car front)
3. For bonding different material which requires high tensile strength and elasticity, the bonding can bear high mechanical deformation force
TDS/specification
|
Model Number |
PU 8611 |
|
Main Raw Material |
Polyurethane |
|
Color |
Black |
|
Density |
1.35±0.05Gr/cc |
|
Extrudability |
≥60ml/min |
|
touch dry time |
10-30Min |
|
Curing speed |
3-5Mm/24hrs |
|
Shore A-hardness |
65±5ShoreA |
|
Tensile strength |
≥6N/mm2 |
|
Tensile-shear strength |
≥3N/mm2 |
|
Application temperature |
5~35℃ |
|
service temperature |
-40~80℃ |
Clean before operation
Clean and dry all surfaces by removing foreign matter and contaminants such as oil dust, grease, frost, water, dirt, old sealants and
any protective coating. Dust and loose particles should be cleaned.
Direction of operation
Tool:Manual or pneumatic plunger caulking gun
For cartridge
1.Cut nozzle to give the required angle and bead size
2.Pierce the membrane at the top of the cartridge and screw on the nozzle
3.Place the cartridge in an applicator gun and squeeze the trigger with equal strength
For sausage
1.Clip the end of the sausage and place in barrel gun
2.Screw end cap and nozzle on to barrel gun
3.Using the trigger extrude the sealant with equal strength
Attention of operation
Wear suitable protective clothing, gloves and eye/face Protection. After contact with skin, wash immediately with plenty of water and soap. In case of accident or if you feel unwell, seek medical advice immediately
◆Product Warranty
All product properties and application details based on information believe to be reliable and accurate. But you still need to test its property and safety before application. The advices we supply don't apply in any circumstances. Sepuna don't make assurance of any other applications outside the specification until Sepuna supply a special written guarantee. Sepuna is only responsible to replace or refund if this product is defective within the warranty period stated above. Sepuna makes it clear that will not be liable of any accidents.